JP40 12 Volt Lithium Car audio Battery



An ideal solution to 12v car audio lithium battery wonders is here! This may help those that both do and dont have a high amperage custom alternator. NOTE that having an improved electrical with a high output alternator will benefit the JP 40 - 12v car audio lithium battery but isn't needed. This 12v car audio lithium battery is good between 6000w thru 12,000w systems.

Wattage rating varies widely based on alternator input ( 6000-12000W)
USE ONLY INSIDE OF VEHICLE. (Do not use beneath the hood or beyond vehicle. DO NOT use with some other form of batteries including different lithium chemistries and any lead acid or AGM batteries)

Example:
 

  • 120-160A alternator - 6,000w rating
  • 240-270A alternator - 8,000w rating
  • 320-370A alternator - 10,000w rating
  • Single 450A Alternator Or Dual 240+a alternators - 12,000w rating

This battery is really a Lithium Iron Phosphate (LiFeP04/LFP). Down4sound's JP40 is the absolute most powerful LFP for the size in the automobile audio industry.

 

  • JP40 Battery Size is 10.5 inches long, 8.25 inches wide, and 3 inches tall. Weighing in at 14 pounds.
  • The JP40 is the very first car audio lithium battery with an integrated voltage and temperature monitoring and notification system. We are taking the guesswork from the picture.
  • The JP40 also features a compact LOW profile & infinitely expandable car audio lithium battery. The JP40 shares a similar look to JP Amplifiers having its Sleek machined aluminum housing, allowing rapid heat dissipation  car audio lithium battery; a bonus is that's it's easily mountable.

No voltage boosting necessary- DO NOT EXCEED 14.8v as this will cause damage to the battery.

 

  • Onboard balancing

Aluminum housing isolated from ground to reduce the risk of short if 12V power accidentally contacts the battery housing.

SPECIAL INSTRUCTIONS FOR THIS PRODUCT
This system includes a metal housing. The metal housing is employed to wick away the warmth generated by the
lithium cells under high load to help keep them cooler and to allow them to operate at higher efficiency. Metal also
conducts electricity and requires added safety considerations when applying this product. This battery is
intended to be properly mounted before use. If the battery isn't mounted it's easy for the battery to
shift during use and it could enter into experience of metal causing a quick to the battery. Extra care must
be studied when attaching ring terminals, bus bars, and other attachment. The insulated area round the
terminals and the safety bar involving the terminals make accidental shorts much less inclined to occur.
Make certain all wires and connections in the vicinity of the battery are properly insulated to prevent any
accidental shorts.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “JP40 12 Volt Lithium Car audio Battery”

Leave a Reply

Gravatar